Panorama Mode - Kodak Pixpro FZ51 User Manual

Panorama Mode

Panorama Mode allows you to create a panoramic
picture. The camera will automatically compose a
panoramic picture using the individual shots that you
take.
Follow these easy steps to create a panoramic picture:
1. Press the button to select Panorama Mode (
2. Press the arrow buttons to select a shooting
direction. (The right direction is used as default if you
do not make any choice) 2 seconds later, the camera
is ready to take pictures. You can also press the
button or half press the shutter button to be ready to
take pictures.
3. Compose the first view of the panoramic picture on
the LCD and press the Shutter button to capture the
image.
4. After the first shot is taken, the semi-transparent
image of the first shot will appear at the edge of
the screen. You can use this image to compose
your picture before you press the shutter button to
capture and finish manual stitching.
30
).
5. If continuous pictures are less than 4 shots, press
button, the camera will splice the pictures
automatically. Press playback button to enter
playback mode to see the effect.
6. If you take 4 pictures, the camera will splice the
pictures automatically. Press playback button to enter
playback mode to see the effect.
After selecting Panorama Mode, Flash, Self-timer,
Macro Mode and Exposure Compensation cannot
be adjusted.
In Panorama Mode, up to 4 photos can be captured
when the image size is set at 2MP.
Pictures cannot be deleted, nor the zoom adjusted
until the series is finalized.