Nylon Line Installation; Front Handle Installation - Echo SRM-210 Operator's Manual

NYLON LINE INSTALLATION

Tools Required: None
Parts Required: Two (2) Pre-cut Nylon Line 8 in. X .095 in.
1. Shut engine off. Lay unit on the ground with head assembly up.
2. Remove old nylon line through center recess of head.
3. Thread new lines through outside holes (A) in housing until ends
meet in center of recess.
NOTE
Insert cutting line ends to center of head recess to insure easy
removal of used lines.

FRONT HANDLE INSTALLATION

Tools Required: Screwdriver.
1. Position front handle for comfortable operation and secure screws.
G T
RASS RIMMER
O
PERATOR
A
/B C
RUSH UTTER
' M
S ANUAL
13