Aiwa TV-SE141 Service Manual page 7

4. NK C.B. (PWB, NK) REMOVAL
(1) Disconnect CN903 (CRT GND).
(2) Disconnect PN551, PN552
(3) Remove the NK C.B. in the direction of arrow 1.
(See Figure 4-1)
5. MAIN C.B (PWB, MAIN) REMOVAL
(1) Remove connector (CN480).
(2) Remove connector (CN801).
(3) Remove connector (CN802).
(4) Pull out the MAIN C.B. in the direction of the arrow 2
(See Figure 4-1).
CN802
(Power Cord)
CN801
(Degauss
cord)
NK C.B
PN552
PN551
CN903
– 7 –
Front cabinet
MAIN C.B
CN480
(Speakers)
Figure 4-1