Zone Control; Displaying The Zone Control Screen - Kenwood Excelon KVT-817DVD Instruction Manual

Zone Control

You can set the front and rear audio source.

Displaying the Zone Control screen

Zone Control
Zone Control screen
MENU
4
1
6
2
TV
3
7
Front
1
8
Area Reverse
100
|
English
5
Zone
Rear Vol. 15 6
Dual Zone
5
DVD
7
Rear
Zone Control Zone Control Zone Control
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Setup Menu. (page 62)
4 Calls the Sound Effects Menu.
5 Turns the Zone Function (that sets different source
1
sounds for front and rear speakers) On or Off.
When turned On,
shown.
6 Adjusts the volume of the rear channel.
(This button appears when the Zone function is
On.)
7 Sets the front and rear audio source separately.
1
(This button appears when the Zone function is
On.)
• When the rear speaker sound is switched, the audio source
that is output at the AV OUTPUT terminal is also switched to
the same source.
However, if you have set the "Area" to "Reverse", the audio
source that is output at the AV OUTPUT terminal is switched
depending on the front sound source.
8 Switches the front and rear audio sources.
(This button appears when the Zone function is
On.)
Use "Reverse" to change over the front and rear
audio sources.
• There are following limitations when zone function is set
" "
to On .
- There is no output from the subwoofer or center.
- <Audio Setup> (page 64), <Equalizer> (page 92),
<Surround Control> (page94), <SRS WOW> (page 96)
<Position> (page98) are not available.
Sound Effects Menu
, and Rear volume are
Front Rear