Top Burners - Kenwood CK 740 Instructions For Use Manual

CONVERSION TO LPG
1 - Injectors replacement of

top burners

The diameter is marked on the injector
in cents of millimetre.
Select the injectors to be replaced
according to the "Table for the choice of
the injectors" (page 40).
To replace the injectors:
– Remove the gratings, the burner and
the covers;
– Using a wrench, substitute the nozzle
injectors "J" (Fig. 9.3 - 9.4) with those
most suitable for the kind of gas for
which it is to be used.
The burners are conceived in such a
way so as not to require the regulation
of the primary air.
J
Fig. 9.3
J
Fig. 9.4
41