Cables And Adapters; Usage Guidelines - InFocus LitePro 580 User Manual

Cables and adapters

The LitePro 580 comes with these cables and adapters:
•
•
•
•
•
•

Usage guidelines

•
•
•
•
•
•
•
LitePro 580 User's Guide
VGA cable, a Y-shaped cable that connects the LitePro to your
computer and its monitor. Its ends are labeled "LCD," "Monitor,"
and "VGA."
Two Macintosh adapters for the VGA cable.
Audio/video cable to connect the LitePro to your video
equipment.
LP Utilities serial cable to connect the LitePro to your computer.
Macintosh adapter for the LP Utilities serial cable.
Power cord.
The LitePro can become very warm during use. Make sure there
is no flammable material such as paper or cloth under, on, or near
the projector. Use extreme care when handling the projector. We
recommend that you let the projector cool before lifting it.
Do not block the ventilating grill on the left side of the projector.
Restricting the air flow can cause it to overheat and shut down
automatically.
Do not place objects on or insert metallic objects in the projector.
Avoid leaving the LitePro in direct sunlight or extreme cold for
extended periods of time. If this happens, allow it to reach room
temperature before use.
Do not expose the LitePro to moisture or dust.
Handle the LitePro as you would any product with glass
components. Do not drop it.
Transport the LitePro in the original shipping carton or vendor-
approved hard or soft case.
Introduction
5