SAFETY INSTRUCTIONS Congratulations! you have just purchased a high-quality laurastar steam station that combines Swiss design and technology. Read this Instruction Manual and the safety instructions carefully before using your appliance for the first time, and retain this Instruction Manual for future use.
Which water should be used? Filling your laurastar has been designed for use with tap water. However, we • lift the cover of the water reservoir and remove the reservoir by recommend using the filter cartridge provided in order to extend the pulling on the cover.
Indication on Softpressing • To remove the Softpressing soleplate (10 / 11), pull on the tab and Iron setting Material the clothing soleplate remove the iron while it is still hot. extremely delicate man-made fabrics, e.g.: WARNING: The Softpressing soleplate is hot! Use synthetic velvet, alcantara®...
If the iron’s soleplate is dirty, use our Polyfer cleaning mat in accordance • drain all the water contained in the appliance. with the instructions. This can be obtained at www.laurastar.com or from your approved laurastar retailer. • Retighten the drain screw (15), replace the protective tab and fill the water reservoir (4).
Problems and solutions Technical information Before calling the laurastar Customer Service department, please check the following points : Technical characteristics Symptom Likely cause Remedy Total output 2200 W 1700 W Makes a buzzing noise when steam is Generator vibration (1).
Page 8
PARTICUL AR PURPOSE, SHALL BE LIMITED TO or on behalf of laurastar, which may be identified by the accords to the user and that the user has asserted against materials and workmanship under normal customer use as THE DUR ATION OF THIS LIMITED WARR ANT Y.
Need help?
Do you have a question about the Steam Cleaner and is the answer not in the manual?
Questions and answers