Kenwood KVT-719DVD Instruction Manual page 17

B
Switches Seek Mode
Press the butotn to selects the Seek mode. (see
page 33, 45, 53 for the <Seek Mode>)
C
Switches AV OUT source
Switches the source that is output at the AV
OUTPUT terminal when it is pressed more than
1 second.
D
Screen Setup
Press the button.
Displays the Screen Control Screen (page 58).
E
Switches Screen Mode
Press the button to switches the screen mode.
(page 78)
The DVD Disc Menu screen appears when you
press the button more than 1 second. (page
20)
⁄
• DVD Disc Menu is not available when the top menu of
the DVD is shown.
A
Theft Deterrent Protection panel
The protection panel of the unit can be
detached and taken with you, helping to deter
theft.
Removing the Protection panel
Press the Release button Å . Drawing the
protection panel to left side pull it to forward
and remove it.
¤
Close the monitor first, then remove or attach the
•
protection panel.
• After you have removed the protection panel, you
cannot operate the receiver.
• After you have removed the protection panel, you can
flash the burglar alarm lamp (page 80).
Reattaching the Protection panel
Place the right end of the protection panel
onto hooks and push it until clicked and
locked. Push the protection panel in until it
clicks. The protection panel is locked in place,
allowing you to use the unit.
Two hooks
English English 17 17