Hitachi DH 24PM Technical And Service Manual page 11

G. Grooving (Hammering only)
Grooving chisel
(SDS-plus shank)
Code No. 316659
H. Driving screws (Rotation only)
(1) Cross-recessed head (Phillips) bit
[Overall length: 70 mm]
(For use with cross-recessed head (Phillips) screw)
Stamped bit No.
Bit No. Code No. Applicable screw dia. (mm)
No. 2 955654
955655
No. 3
I. Grease for electric impact drill
Containing 500 g (17.64 oz): Code No. 980927
Containing 30 g (1.06 oz): Code No. 981840
70 g (2.5 oz): Code No. 308471
J. Dust cup, dust collector (B)
Dust cup
Code No. 971787
4 --- 5
6 --- 8
Dust collector (B) ass'y
Code No. 306885
(2) Slotted-head (minus) bit
[Overall length: 50 mm]
(For use with slotted-head (minus) screw)
Tip thickness
Bit tip thickness Code No.
0.8 955658
955673
1
--- 8 ---
Applicable screw dia. (mm)
4
5 --- 6