Av Interface Setup - Kenwood KVT-829DVD Instruction Manual

SETUP menu
System SETUP
Key illumination color
6
Display illumination color
7
6 Select an illumination color of receiver
buttons. (
"Green": Green
"Red": Red
7 Select an illumination color of the Sub
Display. (
"Blue": A blue color display.
"Key Sync": The same color as the this unit
buttn illumination color.
8 Return to the original screen.

AV Interface Setup

You can set audio and visual (AV) interface
parameters.
1 Display the AV Interface screen
Touch [AV Interface] in the SETUP Menu
(page 68).
2 Setup each item
1
2
3
4
1 Sets a name to be displayed when you
select a system that is connected via the AV
INPUT1 port. (
⁄
• If you have set the navigation system connection
to "AV-IN", the display is fixed to "NAV1".
74 KVT-829DVD
10:10
2
Green
Blue
8
Red)
Blue)
5
VIDEO1)
2 Sets an image display of the system that is
connected via the AV INPUT2 port. (
"Off": When the image source is switched,
an image entered via the AV INPUT 2
port is displayed.
"On": When an image signal is entered via
the AV INPUT2 port, this image is
displayed.
3 Sets a name to be displayed when you
select an image of the system that is
connected via the AV INPUT2 port.
( VIDEO2)
4 Selects a navigation system connection.
( RGB)
"RGB": Allows the Kenwood's Navigation
System to connect via its interface
cable.
"AV-IN": Allows a third-party navigation
system to connect via the AV INPUT
port.
"Off": Must be used if no navigation system
is connected. (The navigation display
is cancelled when the AV source is
switched.)
5 Return to the original screen.
6
7
8
6 Selects an AV source to be output at the AV
OUTPUT port. ( AV-IN1)
7 Sets a method to switch to the rear view
camera video display. (
"On": Switches to the rear view camera
video display when engaging the
shift knob of car to "Reverse".
"Off": Switches to the the rear view camera
video display when engaging the
shift knob of car to "Reverse" and
then pressing the [V.SEL] switch
several times.
Off )
Off )