Cleaning/Replacing Dust Container Filter - Electrolux SuperCyclone User Manual

English
Cleaning / Replacing the dust container filter
(Ref No. EF95):
Clean the dust container filter at every 5th emptying of
the dust container or when the filter is visually dirty.
46
46 Remove the filter from the dust container by
pulling the small tab.
47 Rinse the filter in lukewarm water and let it dry
thoroughly (6 to 12 hours).
48 Reinsert the clean filter. Replace the dust con-
tainer and close the lid.
If necessary, the filter can be replaced.
Cleaning /replacing the exhaust filter:
Replace (or wash) the exhaust filter every year.
48
There are two types of exhaust filters:
Micro filter (Ref No. EF17 this type of filter can not be
washed and must be replaced with a new one.)
HEPA H12 Washable (Ref No. EFH 12W)
49 To replace the exhaust filter, open the exhaust fil-
ter lid by pulling the back edge upwards. Replace
the filter.
47
50 Close the lid inserting the front hooks into the
rails. Push the lid forward and press down in the
centre until both sides click in.
Cleaning the HEPA H12 Washable Filter*
If you have a HEPA H12 Washable exhaust filter*,
wash the filter once a year. If the filter is dam-
aged, replace it with a new filter.
47 To clean the HEPA H12 Washable filter*, rinse the
inside (dirty side) in lukewarm tap water. Tap
the filter frame to remove the water. Repeat the
49
process four times. Let dry thoroughly and then
reinsert into the cleaner as above.
Note: Do not use cleaning agents and avoid touching
the filter surface. Let the filter dry completely before
putting back!
50
* Certain models only.
14