Top Cover - Canon Pixma iP8500 Quick Start Manual

protective cap
Green Red
(BCI-6G) (BCI-6R)
Photo Cyan Cyan
(BCI-6PC) (BCI-6C)
6
3
4
5
Photo Black
Magenta (BCI-6BK)
(BCI-6PM)
Magenta Yellow
(BCI-6M) (BCI-6Y)
6
Hold the ink tank as shown in the
diagram and remove the orange
protective cap.
• Do not squeeze the side of
ink tanks as this may cause
the ink to leak out and stain
your clothes and hands.
• Do not touch the open ink
port.
• Do not reattach the protective
cap once you have removed
it.
Insert the yellow ink tank into the right-
hand slot. Press the
tank until it clicks into place.
Use the same procedure to install the
other ink tanks into their appropriate
slots.
Check the labels to make sure that each tank is in the
correct position.
• Only install the ink tanks in the positions specified
by the labels.
• If ink tanks are not installed in the right position,
colors will not be printed correctly. Immediately
reinstall the tank in the correct position and carry
out Print Head Cleaning. For details, refer to the
User's Guide.
Put back the Inner Cover and close the

Top Cover.

ink port
mark on the ink