This section identifies potential service modes used for service along with their function and purpose. This section also
identifies error detection LEDs and error codes.
LED Indicators
Indicator
Flick frequency (times/sec. 0)
10
LED flickers red
1
10
1
LED flickers blue
Service Mode OSD Menu
Entering the OSD Menu
To enter the Factory OSD menu:
1 Turn the TV on.
2 Press the Menu button, and select User OSD Menu.
3 Select Audio, Settings, and then Balance.
4 Use the numeric keypad on the remote control to enter 9-1-8-OK in sequence.
The Factory OSD should be displayed.
If necessary, re-enter the number keys, and then press OK on the remote control.
NOTE:
Exiting the OSD Menu
To exit from the Factory OSD menu, use the numeric keypad on the remote control, and enter 9-1-8-9.
If the character "M" appears on the screen, press the Menu button first.
NOTE:
Initial display when the service mode is switched to below OSD
Setting
White Balance
Video Setting
Audio Setting
Factory INI
Factory Options
34
HP High-Definition Plasma TV Service Manual PL4260N, PL5060N
Diagnostics
Failure parts
Tuner (A101)
SVP-EX62(U9)
MSP4450G(NP01)
Panel
Item
LB Bri
LB Crt
HB Bri
HB Crt
RCut
RDrv
GCut
GDrv
BCut
BDrv
Cold TMP
Warm TMP
Auto White Balance
Location
Tuner and Audio Board
Main Board
Tuner and Audio Board
PDP Panel Module
Default
20
20
80
80
8
264
4
273
0
256