HP PL4260N Service Manual page 19

Connector label
Speaker R
Component 1
Comp 1
Audio In
Component 2
Comp 2
Audio4 In
HDMI
PC
PC/DVI Audio In
RS232
Digital Audio Out
RF Input
Video Out
Audio Out
S-video 1
Video 1
Audio1 In
S-video 2
Video 2
Audio2 In
Video In 1
Audio1 In
Video In 2
Audio2 In
AC In
Speaker L
Connector description
Sound output to the right speaker.
Connect standard inputs 480i, 480p, 720p, and 1080i. The TV automatically determines what
has been connected. Some set-top boxes must be set for a specific resolution out.
Connect High-Definition Multimedia Interface, for digital, high-definition optional equipment.
Connect D-sub pin 15.
Connect PC Audio in or DVI Audio in when using a DVI-to-HDMI adapter.
SW upgrading or RS232 command input port. Use for service only.
Connect a digital audio cable for external digital audio system (optional).
Connect to an air antenna or cable signal source.
Connect composite video and left-right audio output port.
Connect an S-video in connector and S-video left-right audio in connectors.
(Audio connectors are shared with Video In.)
Composite video in connectors, composite video left-right audio in connectors.
(Audio connectors are shared with S-video.)
Connect the included power cord. NOTE: Use only the provided power cord.
Sound output to the left speaker.
HP High-Definition Plasma TV Service Manual PL4260N, PL5060N
13