Table of Contents
Advertisement
EMISSION CONTROL
EPA PHASE 2
The emission control system for these engines are
EM/TWC (Engine Modification and Catalyst).
An Emission Control Label is located on the
engine. (This is an EXAMPLE ONLY, information
on label varies by engine FAMILY).
The 300 hour emission durability compliance period is the time span selected by the manufacturer certify-
ing the engine emissions output meets applicable California and/or U.S. EPA emissions regulations,
provided that approved maintenance procedures are followed as listed in the Maintenance Section of this
manual.
The ECHO product you purchased has been factory pre-assembled for your convenience. Due to packaging
restrictions, guide bar and saw chain installation and other assembly may be necessary.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or
missing parts. Use the contents list to check for missing parts.
CONTENTS
1 - Power Head
1 - Guide Bar
*1 - Kick Guard
1 - Hex Head Bolt
1 - Hex Nut
*1 - Saw Chain
1 - Instruction Manual
1 - Safety Manual
1 - Warranty Registration Card
1 - Limited Warranty Statement
1 - T-Wrench
1 - Echo Power Blend
* The machine may be delivered with guide bar and saw
chain assembled.
E
MISSION
PRODUCT EMISSION DURABILITY
D
ESCRIPTION
2-stroke oil sample
TM
D
ATA
IMPORTANT ENGINE INFORMATION
ENGINE FAMILY: 6EXHS.0334CA DISPLACEMENT: 30.1
EMISSION COMPLIANCE PERIOD: 300 H
THIS ENGINE MEETS U.S. EPA PH2 AND 2005 - 2006
CALIFORNIA EMISSION REGULATIONS FOR SOREs.
REFER TO OWNER'S MANUAL FOR MAINTENANCE
SPECIFICATIONS AND ADJUSTMENTS.
6
CC
OURS
*
Hide quick links:
Advertisement
Table of Contents
