Decals; Emission Data - Echo CS-330T Instruction Manual

Hide thumbs Also See for CS-330T:
Table of Contents

Advertisement

DECALS

C S - 3 3 0 t
Caution: This saw shall be used only by certified
tree service professionals.
For safe operation, follow all safety precau-
tions and instructions in operator's manuals.
(replacement manuals are available from your
echo dealer.)
Hold chain saw firmly with both hands.
to aVoiD KiCKBaCK
1. Contact of the guide bar tip with any object
should be avoided.
2. tip contact may cause the guide bar to move
suddenly upward and backward which may
cause serious injury.
3. always use two hands when operating the
chain saw.
Locate these safety decals on your unit. Make sure the decals are legible and that you understand and follow the
instructions on them. If a decal cannot be read, a new one can be ordered from your ECHO dealer.
e
D
mIssIon
AtA
emIssIon contRol
EPA 2010 and Later
The emission control system for the engine is EM (en-
gine modification) and, if the second to last character
of the Engine Family on the Emission Control Informa-
tion label (sample below) is "C", "K", or "T", the emis-
sion control system is EM and TWC (3-way catalyst).
The fuel tank/fuel line emission control system is EVAP
(evaporative emissions). Evaporative emissions for
California models are only applicable to fuel tanks.
an emission Control Label is located on the engine.
(This is an EXAMPLE ONLY, information on label varies
by engine FAMILY).
ProDUCt eMiSSion DUraBiLitY (eMiSSion CoMPLianCe PerioD)
The 50 or 300 hour emission compliance period is the time span selected by the manufacturer certifying
the engine emissions output meets applicable emissions regulations, provided that approved mainte-
nance procedures are followed as listed in the Maintenance Section of this manual.
PoUr ÉViter LeS reBonDiSSeMentS
1. eviter touit contact entre le nez du guide-
chaine et un objet quelconque.
2. tout contact du nez peut provoquer un
mouvement brusque vers le haut ou vers les
bas et entrainer de graves blessures.
3. toujours employer lex deux mains pour
opérer la scie á chaine.
(
&
exHAUst
evAPoRAtIve
)
9

Advertisement

Table of Contents
loading

Table of Contents