Toshiba RAS-M10PKVP-E Service Manual page 101

No. Part name
Front 1. Detachment
b
cabinet
2. Attachment
Procedure
1) Perform step 1 in a.
2) Remove the fi xing screws (ST1TØ4
× 8L 2 pcs.) used to secure the
front cabinet and inverter cover, the
screws (ST1TØ4 ×8L 3 pcs.) used
to secure the front cabinet at the
bottom, the fi xing screws (ST1TØ4 ×
8L 2 pcs.) used to secure the motor
base, and the fi xing screws (ST1TØ4
× 8L 1 pc.) used to secure the side
cabinet (right).
• The front cabinet is fi tted into the
side cabinet (left) at the front left
side so pull up the top of the front
cabinet to remove it.
1) Insert the claw on the front left side
into the side cabinet (left).
2) Hook the bottom part of the front
right side onto the concave section of
the bottom plate.
Insert the claw of the side cabinet
(right) into the square hole in the
front cabinet.
3) Return the screws that were removed
above to their original positions, and
attach them.
Front cabinet
Claw
Square hole
– 101 –
Remarks
Motor base
Inverter cover
Side cabinet (right)
Concave section