LG Flatron LCD 575LE Service Manual page 6

On Screen Display (OSD) Control Adjustment
Making adjustments to the image size, position and operating parameters of the monitor are quick and easy with the On
Screen Display Control system. A quick example is given below to familiarize you with the use of the controls. Following
section is an outline of the available adjustments and selections you can make using the OSD.
NOTE
Allow the monitor to stabilize for at least 30 minutes before making image adjustment.
To make adjustments in the On Screen Display, follow these steps:
1. Connect the speaker as described in below picture.
2. Connect the one end of Audio DC power
cable,which is attached on the speaker to AUDIO DC
OUT connector and the other end to DC 24V
1
connector on the back of the speaker.Then connect
2
the audio cable port which is directly connected to the
speaker to AUDIO L-OUT port
3. Connect the audio cable from the Speaker's AUDIO
IN port to the audio output port of your computer's
4
sound card.
4. After connecting both cables, fix them with cable
fixed holder (extra cable fixed holders are
shipped with the speaker).
5. Turn on the speaker with power button and
adjust volume to proper level.
Connection the Audio
2
4
3
.
3
1. Press the OSD Button, then the main menu of the
OSD appears.
2. To acces a control, use the
the icon you want becomes highlighted, press the
SET Button.
3. Use the
desired level.
4. Accept the changes by pressing the SET Button.
5. Exit the OSD by Pressing the OSD Button.
24V
AUDIO
IN
AUDIO
L-OUT
24V
AUDIO
IN
AUDIO
L-OUT
Volume Botton
Used to adjust volume.
Mute Botton
Used to turn ON/OFF mute
function.
Power Botton
Used to turn ON/OFF audio.
or Buttons. When
Buttons to adjust the item to the
1
Cable fixed holder
PC