Contents; Assembly; Throttle Handle Assembly - Echo EA-400 Operator's Manual

C
ONTENTS
The EA-400/500 Earth Auger Powerhead, Gear Case, and Loop Handles have been factory pre-assembled for your
convenience. The EA-400 Throttle Handle requires assembly. These units are designed for one-person use as an ice
auger, and one or two-person use as an earth auger.
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts.
Use the contents list to check for missing parts.
1 - Power Head/Handle/Gear Case Assembly
1 - Operator's Manual
1 - Warranty Registration Card
1 - Limited Warranty Statement
TM
1 - Echo Power Blend 2-stroke oil sample
A
SSEMBLY

THROTTLE HANDLE ASSEMBLY

Tools Required: Screwdriver, cutting tool
Parts Required: Throttle Handle Assembly, screw, hex nut
1. Cut and remove one (1) white plastic shipping tie that secures
handle assembly to packing materials.
NOTE
DO NOT cut or remove black plastic ties.
2. Remove mounting screw and hex nut from throttle handle assembly,
and slide throttle handle onto mounting bar.
3. Align hole in throttle handle assembly with hole in bar.
4. Secure throttle handle to bar with screw and hex nut.
5. Tighten securely.
E A
ARTH UGER
O ' M
PERATOR S ANUAL
EA-400
EA-400
EA-500
EA-500
9