Table of Contents
Advertisement
Safety and Instructional Decals ................................. 4
Setup ............................................................................ 5
1 Installing the Handle ............................................. 5
2 Installing the Recoil Starter Handle .......................... 5
3 Installing the Discharge Chute Assembly .................. 6
4 Filling the Engine with Oil...................................... 6
5 Adjusting the Control Cable ................................... 7
Product Overview .......................................................... 8
Operation ..................................................................... 9
Filling the Fuel Tank ................................................ 9
Checking the Engine Oil Level .................................. 9
Starting the Engine .................................................11
Engaging the Rotor Blades.......................................12
Disengaging the Rotor Blades ..................................12
Stopping the Engine ...............................................12
Deflector ...........................................................13
Clearing a Clogged Discharge Chute .........................13
Self-propelling the Snowthrower ..............................13
Preventing Freeze-up after Use.................................13
Operating Tips ......................................................14
Maintenance .................................................................15
Recommended Maintenance Schedule(s) ......................15
Adjusting the Control Cable.....................................15
Inspecting the Rotor Blades .....................................15
Changing the Engine Oil .........................................15
Servicing the Spark Plug ..........................................16
Replacing the Drive Belt ..........................................16
Storage ........................................................................18
Storing the Machine................................................18
Safety
This machine meets or exceeds the B71.3 specifications
of the American National Standards Institute in effect
at the time of production.
Read and understand the contents of this manual before
you start the engine.
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury
or death.
Improperly using or maintaining this machine could
result in injury or death. To reduce this potential,
comply with the following safety instructions.
This machine is capable of injuring hands and feet and
of throwing objects. Failure to observe the following
safety instructions could result in serious injury.
Training
•
Read, understand, and follow all instructions on the
machine and in the manual(s) before operating this
machine. Be thoroughly familiar with the controls and
the proper use of the machine. Know how to stop the
machine and disengage the controls quickly.
•
Never allow children to operate the machine. Never allow
adults to operate the machine without proper instruction.
•
Keep the area of operation clear of all persons, particularly
small children.
•
Exercise caution to avoid slipping or falling.
Preparation
•
Thoroughly inspect the area where the machine is to be
used and remove all doormats, sleds, boards, wires, and
other foreign objects.
•
Do not operate the machine without wearing adequate
winter garments. Avoid loose fitting clothing that can get
caught in moving parts. Wear footwear that will improve
footing on slippery surfaces.
•
Handle fuel with care; it is highly flammable.
- Use an approved fuel container.
- Never add fuel to a running engine or hot engine.
- Fill fuel tank outdoors with extreme care. Never fill
fuel tank indoors.
- Never fill containers inside a vehicle or on a truck or
trailer bed with a plastic liner. Always place containers
on the ground, away from your vehicle, before filling.
- When practical, remove gas-powered machinery from
the truck or trailer and refuel it on the ground. If
this is not possible, then refuel such machinery on a
trailer with a portable container, rather than from a
gasoline dispenser nozzle.
- Keep the nozzle in contact with the rim of the fuel
tank or container opening at all times, until refueling
is complete. Do not use a nozzle lock-open device.
- Replace gasoline cap securely and wipe up spilled fuel.
- If fuel is spilled on clothing, change clothing
immediately.
•
Use extension cords and receptacles as specified by
the manufacturer for all machines with electric starting
motors.
•
Do not attempt to clear snow from a gravel or crushed
rock surface. This product is intended for use only on
paved surfaces.
•
Never attempt to make any adjustments while the engine
is running (except when specifically recommended by
manufacturer).
•
Always wear safety glasses or eye shields during operation
or while performing an adjustment or repair to protect
eyes from foreign objects that may be thrown from the
machine.
Operation
•
Do not put hands or feet near or under rotating parts.
Keep clear of the discharge opening at all times.
2
Hide quick links:
Advertisement
Table of Contents
