Training; Preparation - Toro 38816 Operator's Manual

Safety
Before Operating
Read and understand the contents of this
manual before operating the snowthrower
Become familiar with all controls and know
how to stop the engine quickly
Operator 's
Position
This machine meets or exceeds the ISO standard 8437
in effect at the time of production.
Read and understand the contents of this manual before
the engine is ever started.
This is the safety alert symbol. It is used to alert you
to potential personal injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury
or death.
Improperly using or maintaining this machine could
result in injury or death. To reduce this potential,
comply with the following safety instructions.

Training

•
Read the operating and service instruction manual
carefully. Be thoroughly familiar with the controls and
the proper use of the machine. Know how to stop the
machine and disengage the controls quickly.
•
Never allow children to operate the machine. Never allow
adults to operate the machine without proper instruction.
•
Keep the area of operation clear of all persons, particularly
small children, and pets.
•
Exercise caution to avoid slipping or falling, especially
when operating in reverse.
Caution: Improper use may result in
loss of fingers, hands, or feet.
.
.
The low-speed auger has a moving pinch
point close to the opening.
3
There is a high-speed
impeller close to the
opening.

Preparation

•
Thoroughly inspect the area where the machine is to be
used and remove all doormats, sleds, boards, wires, and
other foreign objects.
•
Disengage all clutches and shift into neutral before
starting the engine.
•
Do not operate the machine without wearing adequate
winter garments. Wear footwear which will improve
footing on slippery surfaces.
•
Handle fuel with care; it is highly flammable.
– Use an approved fuel container.
– Never add fuel to a running or hot engine.
– Fill fuel tank outdoors with extreme care. Never fill
fuel tank indoors.
– Replace gasoline caps securely and wipe up spilled
fuel.
•
Adjust the collector housing height to clear gravel or
crushed rock surface.
•
Never attempt to make any adjustments while the engine
is running (except where specifically recommended by
manufacturer).
•
Let engine and machine adjust to outdoor temperatures
before starting to clear snow.
•
The operation of any powered machine can result in
foreign objects being thrown into the eyes. Always wear
safety glasses or eye shields during operation or while
performing an adjustment or repair.