Date And Time; Security - Nokia N70 User Manual

data coverage and you select
periodically tries to establish a packet data connection.
Access point—The access point name is needed to use
your device as a packet data modem to your computer.
Configurations
You may receive trusted server settings from your
network operator or service provider in a configuration
message, or the settings may be stored on your SIM or
USIM card. You can save these settings to your device,
view or delete them in Configurations.

Date and time

See 'Clock settings', p. 12.
See also the language settings in 'General', p. 93.

Security

Phone and SIM
PIN code request—When active, the code is requested
each time the device is switched on. Deactivating the
personal identification number (PIN) code request may
not be allowed by some SIM cards. See
and lock codes', p. 99.
98 Copyright © 2006 Nokia. All rights reserved.
When available, the device
'Glossary of PIN
PIN code, PIN2 code, and Lock
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from 0 to 9. See
lock codes', p. 99.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialing of the emergency
number.
If you forget any of these codes, contact your service
provider.
Autolock period—You can set an autolock period, a
time-out after which the device automatically locks and
can be used only if the correct lock code is entered. Enter
a number for the time-out in minutes, or select
turn off the autolock period.
To unlock the device, enter the lock code.
When the device is locked, calls may be possible to the
official emergency number programmed into your device.
Tip! To lock the device manually, press
commands opens. Select
Lock if SIM changed—You can set the device to ask for
the lock code when an unknown SIM card is inserted into
your device. The device maintains a list of SIM cards that
are recognised as the owner's cards.
Closed user group—You can specify a group of people to
whom you can call and who can call you (network service).
code—You can change the
'Glossary of PIN and
None to
. A list of
Lock phone.