Settings; Share Live Video And Video Clips; Accept An Invitation - Nokia N70 User Manual

Hide thumbs Also See for N70:
Table of Contents

Advertisement

• Ensure that both the sender and recipient are
registered to the UTMS network. If you invite someone
to a sharing session and the recipient's device is
turned off, is not within UMTS network coverage, or
does not have Video sharing installed or person-to-
person connections set up, the recipient does not
know that you are sending an invitation. However, you
receive an error message that the recipient cannot
accept the invitation.

Settings

Person-to-person connection settings
A person-to-person connection is also known as a Session
Initiation Protocol (SIP) connection. The SIP profile
settings must be configured in your device before you can
use
Video
sharing. Setting up a SIP profile allows you to
establish a live person-to-person connection to another
compatible device. The SIP profile must also be
established to receive a sharing session.
Ask your network operator or service provider for the SIP
profile settings, and save them in your device. Your
network operator or service provider may send you the
settings over the air or give you a list of the needed
parameters.
If you know a recipient's SIP address, you can enter it on
your contact card for that person. Open
24
Copyright © 2006 Nokia. All rights reserved.
your device main menu, and open the contact card (or start
a new card for that person). Select
>
Web
sip:username@domainname (you can use an IP address
instead of a domain name).

Share live video and video clips

To receive a sharing session, the recipient must install
Video sharing
mobile device. You and the recipient must both be
registered to the service before you can start sharing.
1
Select
If you selected Clip, a list of video clips opens. Select a
video clip you want to share and
invitation.
2
Select the SIP address of the recipient to which you
want to send the invitation from the contacts list.
If the SIP address of the recipient is not available, enter
a SIP address.
3
Sharing begins automatically when the recipient
accepts the invitation.
4
Select
Continue
can rewind and fast forward the clip.
5
To end video sharing, select
slider. Video sharing also ends if the active voice call
Contacts
from
ends.
address. Enter the SIP address in the format
and configure the required settings on their
Options
>
Share video
>
Pause
to pause the sharing session. Select
to resume sharing. If sharing a video clip, you
Stop
Options
>
Add detail
Live
or Clip.
Options
>
Send
or close the camera

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents