Nokia N70 User Manual page 63

Mailbox settings:
Mailbox name—Enter a descriptive name for the mailbox.
Access point in use (Must be
Internet access point (IAP) for the mailbox. See
'Connection settings', p. 95.
My e-mail address (Must be
address given to you by your service provider. Replies to
your messages are sent to this address.
Outgoing mail server (Must be
address or host name of the mail server that sends your
e-mail. You may only be able to use the outgoing server
of your network operator. Contact your service provider
for more information.
Send message—Define how e-mail is sent from your
device. Select Immediately
the mailbox when you select
When conn. avail., e-mail is sent when the connection to
the remote mailbox is available.
User name—Enter your user name, given to you by your
service provider.
Password:—Enter your password. If you leave this field
blank, you are prompted for the password when you try to
connect to your remote mailbox.
62 Copyright © 2006 Nokia. All rights reserved.
defined)—Choose an
defined)—Enter the e-mail
defined)—Enter the IP
for the device to connect to
Send message. If you select
Incoming mail server (Must be
address or host name of the mail server that receives your
e-mail.
Mailbox type:—Defines the e-mail protocol that your
remote mailbox service provider recommends. The options
are POP3 and IMAP4. This setting can be selected only
once and cannot be changed if you have saved or exited
from the mailbox settings. If you use the POP3 protocol,
e-mail messages are not updated automatically in online
mode. To see the latest e-mail messages, you must
disconnect and make a new connection to your mailbox.
Security (ports)—Used with the POP3, IMAP4, and SMTP
protocols to secure the connection to the remote mailbox.
APOP secure login (not shown if IMAP4 is selected for
Mailbox type)—Used with the POP3 protocol to encrypt
the sending of passwords to the remote e-mail server while
connecting to the mailbox.
User settings:
E-mails to retrieve (not shown if the e-mail protocol is set
to POP3)—Define how many new e-mails are retrieved to
the mailbox.
Retrieve (not shown if the e-mail protocol is set to
IMAP4)—Define which parts of the e-mails are retrieved:
Headers only, Partially (kB), or
defined)—Enter the IP
Msgs. & attachs..