Installing The Touch Screen Driver - Xycom VT1040 Hardware Manual

Installing the Touch Screen Driver

If your Xycom flat panel monitor has the touch screen option, you will have to load the correct
touch screen driver on the computer to which you will be connecting the monitor. The
following steps should be performed on that computer.
Note: The following instructions assume that a web browser is installed on the
1. Insert the Xycom Automation Documentation and Support Library CD into the CD-ROM
drive.
2. If the Doc CD autostarts, proceed to the next step. If the Doc CD does not autostart, open
the CD in Windows Explorer and double click on the file "index.html."
3. Choose "Flat Panel Monitors" from the links at the top of the home page and then choose
the appropriate monitor model on the next page. From the resulting page, you can
download the User Manual and/or the touch screen driver.
4. Click on the link to "elo.zip" (the drivers for all of the operating systems are in this file).
Type a destination folder to save the file in and press the "Save" button. The download will
be very short.
5. Using Windows Explorer, go to the downloaded file and extract the compressed files into a
folder of your choosing.
Go to the folder "Elo\Serial Controller" and then to the folder for your operating system.
6.
If your computer doesn't have a web browser, open the CD in Windows Explorer and choose
the "ELO.zip" file from the folder:
Copy it to a folder on your computer and follow steps 5 & 6 above.
computer.
•
If you are installing the DOS driver, click on "install.exe" and follow the
instructions.
•
If you are installing one of the Windows drivers, click on "setup.exe" and follow
the instructions.
DRIVERS/Touchscreen
11 141283 (E)