Advertisement
Fryer Module Specifications
Overall Dimensions
FRYER MODULE
21"
(533)
15"
(381)
1
7
/
"
2
(191)
6"
(152)
1
/
"
2
(13)
DRAIN
SIDES
1"
OUTLET
(25)
FRONT / BACK
Installation Specifications
Failure to locate the fryer module without the proper
clearances will result in a fire hazard.
IMPORTANT NOTE: Installation of the Wolf electric fryer
module must meet minimum clearance requirements
shown in the installation illustration on page 6.
The Wolf fryer module is intended for indoor use. It is
designed to fit a standard 24" (610) deep base cabinet
with 25" (635) deep countertop. Before making the coun-
tertop cut-out, verify that the module will clear the side
walls of the base cabinet.
It is recommended that you use a Wolf cooktop ventilation
hood, pro hood or hood liner with the fryer module. Refer
to the Wolf design guide.
IMPORTANT NOTE: Wolf does not recommend the use of
downdraft ventilation with the fryer module.
MANUAL DRAIN OUTLET
IMPORTANT NOTE: The fryer module must be installed in
a base cabinet that allows access to the manual drain
valve for draining the oil. A heat-resistant bucket must be
positioned under the drain outlet to accept the oil. The
bucket must have a minimum 2 gallon (7.6 L) capacity.
Refer to the installation illustration on page 6 for location
of the manual drain outlet.
4
Advertisement
