Installing The Wheels; Removing The Wheels - Thule Chariot Chinook 1 Instructions Manual

3.4 InStAllInG thE WhEElS

1
A. Press and hold the wheel release button on the wheel.
(See Image 1)
B. Insert the wheel axle into the carrier axle.
C. Release the wheel release button.
D. Press the wheel fully into the carrier axle.
E. Verify that the wheel is securely attached to the carrier
by giving it a sharp pull.
F. Repeat for the other wheel.
G. Using a tire pressure gauge check the air pressure in
each tire. The minimum recommended tire pressure is
30 psi (2.1 bar) and the maximum is 35 psi (2.5 bar).If
air pressure is too low in either one of the tires fill them
up using a bicycle tire pump.
WARNING
Before each journey make sure that
both of the wheels are securely locked
in the carrier axle.
10

3.5 rEmovInG thE WhEElS

2
A. Press and hold the wheel release button on a wheel.
(See Image 2)
B. Pull the wheel out of the carrier axle.
C. Repeat for the other wheel.
51100968 - B