Table of Contents
Advertisement
Quick Links
DELTA REGIS
Tools Inc.
18VDC ESB6-X Series
Cordless Screwdrivers
Operation Manual
Screwdriver Models :
CAUTION - Please read, understand, and follow all operating and safety instructions in
this manual before using the tools.
The 18VDC ESB6-X Series Cordless Electric Screwdrivers are designed for exclusive
use with specific Delta Regis batteries and battery chargers as defined in this manual.
Do not attempt to use the tools, batteries and/or battery chargers with any products other
than as specified in this manual.
If you have any questions or concerns, please contact us at:
Delta Regis Tools, Inc.
3315 Industrial 25th St.
Ft. Pierce FL 34946
USA
Doc. 18V_ESB6-X_Series_Manual_R0
Copyright © 2014 Delta Regis Tools, Inc
ESB6-X3.5, ESB6-X3.5F, ESB6-X5F
ESB6-X6, ESB6-X9, ESB6-X12
Ph +1-772-465-4302
Fx +1-772-465-4368
E-mail: sales@deltaregis.com
Website: www.deltaregis.com
Advertisement
Table of Contents
Related Manuals for Delta Regis 18VDC ESB6-X Series
Summary of Contents for Delta Regis 18VDC ESB6-X Series
- Page 1 The 18VDC ESB6-X Series Cordless Electric Screwdrivers are designed for exclusive use with specific Delta Regis batteries and battery chargers as defined in this manual. Do not attempt to use the tools, batteries and/or battery chargers with any products other than as specified in this manual.
- Page 2 9. The ‘ESB-CHG’ series battery chargers are for use exclusively with Delta Regis brand 18VDC ‘ESB-18VL’ series lithium-ion batteries as specified on the following pages. Use of the battery charger (or battery) with any product not specified in this manual may result in malfunction, damage, or injury.
-
Page 3: Included Accessories
DELTA REGIS 18V ESB6-X Series Tools Inc. Operation Manual Model Numbers and Specifications 18VDC Cordless Electric Screwdrivers (CE / RoHS) Speed (RPM) Dimensions (mm) Applicable Batteries / Chargers Model Number Range Nm Range In-lbs Hi / Lo Length x Height... -
Page 4: Setting The Torque
DELTA REGIS 18V ESB6-X Series Tools Inc. Operation Manual Quick Set-up and Operation Overview 1. Fully charge the battery using the battery charger before first use to achieve maximum fastening cycles. 2. Ensure that the screwdriver’s FWD/REV switch is ‘OFF’ . -
Page 5: Features Overview
DELTA REGIS 18V ESB6-X Series Tools Inc. Operation Manual Features Overview Torque Locking Sleeve The lock sleeve covers the Bit Holder torque adjusting nut to deter Pull sleeve to unintentional changes to the Housing Nut Hi/Lo Speed insert/remove bits. adjustment. - Page 6 DELTA REGIS 18V ESB6-X Series Tools Inc. Operation Manual Inserting / Removing Power Bits Insert the desired driver bit into the quick change chuck of the screwdriver by pulling the outer sleeve of the bit holder to release the retainer. Verify that the bit is locked properly in position after installing. Please note, only use 1/4”...
-
Page 7: Side Handle Installation
DELTA REGIS 18V ESB6-X Series Tools Inc. Operation Manual LEDs / Buzzer Rundown Status Indicator When the driver reaches the set torque and clutches out it will emit a short beep and the green rundown LED will flash once indicating an OK rundown. If the driver does not clutch out before the operator releases the trigger the driver will emit a long beep and the red rundown LED will flash once indicating a NG rundown. -
Page 8: Parts And Accessories
Tools Inc. Operation Manual Parts and Accessories If you require parts or accessories for your Delta Regis product, please refer to our website or contact us for further information. Service The ESB6-X Series cordless electric screwdrivers, batteries and battery chargers are not user serviceable. Any repairs must be performed by a Delta Regis authorized service center.