Table of Contents
Advertisement
Installation
Installation
After installation, do not switch the power to the refrigerator on for at least 3 hours – the
unit needs to stand. The unit should be kept away from direct sunlight. If the appliance is
located on carpet, damage may be caused to the carpet due to heat being emitted from
the unit.
Remove all transport tapes and foam protection pieces . Clean the interior of the
refrigerator with a cloth dampened in lukewarm soap and water. Wipe with clear water
and wipe dry.
When the appliance has been positioned, adjust the two front feet to ensure the unit is
stable. This is essential to ensure quiet running and proper door opening /closing. See fig
1.0 below.
Once the appliance has been standing for 3 hours, plug in the refrigerator, locate the
thermostat knob inside the compartment and set to "3" position and switch on the
electricity . The compressor will begin to work. Close the door.
Leave the appliance for a minimum of 3 hours for the correct temperature to be reached
before placing food inside.
For Customer Services & Spare Parts please call 0845 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm or visit
us at www.productcareuk.com
8
Hide quick links:
Advertisement
Table of Contents
