Sanyo PLC-XU355A Service Manual page 15

Mechanical Disassembly
3.Speaker(SP901), Fan (FN901),lamp unit(lP900) and optical unit removal
1. Remove the 4 screws A (T3x8) to remove the speaker holder and the
Speaker (SP901).
. Remove  screws B (T3x8) and screw C (T3x1) to remove the fan
(FN901).
3. Remove 3 screws D(M3x7) to remove the
Lamp unit (LP900).
4. Remove the  screws E (T3x6) to remove the CONNECT ID board.
5. Remove the screw F (T3x8) to disconnect the Ballast socket.
6. Remove 5 screws G (T3x8) and 3 screws H(T3x8) to remove the Optical
Unit and the Lamp holder.
Optical Unit
G (T3x8)X5
CONNECT ID
E (T3x6)x
E
board
D
D (M3x7)X3
Lamp
(LP900)
G
G
G
G
H
H
-15-
D
A
Ballast socket
F (T3x8)
H(T3x8)X3
B
Fan (FN901)
Lamp holder
A (T3x8)X4
A
A
Speaker
(SP901)
Speaker holder
B (T3x8)X
C (T3x1)
Fig.3