Sanyo PLC-XU355A Service Manual page 14

Mechanical Disassembly
2. Main Board, AV Panel, Network Board, Antenna Board and Fan removal
1. Remove 6 screws A (M.5x6) and  screws B (M4x4) to remove the Main Board.
. Release the hooks to remove the AV Panel and remove 3 screws C (T3x6) to remove
the AV Board.
3. Remove  screws D (T3x8) to remove the Network Board and remove screw
E(Mx4) to remove the Antenna board.
4. Remove the Left side shield. Remove 4 screws F (T3x6) to remove the Network
Board Holder. Remove the Network Board left and right shields. Remove the Module Board.
5. Remove 3 screws G (T3X8) to remove the fans (FN90 and FN906).
Main Board
Left side shield
F
F
Network Board
E (Mx4)
left shield
Antenna Board
A
A
A
AV Board
F (T3x6)x4
F
Network Board
Network Board
right shield
Network Board
Holder
A
A
A
Hooks
Module Board
D (T3x8)x
D
G
G
Fan (FN906)
-14-
B
C (T3x6)x3
C C
AV Panel
B (M4x4)x
G (T3x8)x3
SW901
Fan (FN90)
Fig.2