Unloading Images To A Computer Using The Dock - HP Photosmart 620 series User Manual

Hide thumbs Also See for Photosmart 620 series:

Table of Contents

Unloading images to a

computer using the dock

NOTE

camera to

found in the

Check that the HP Camera Dock is connected to your

computer.

Place the camera in the HP Camera Dock. It will turn on

automatically, and a dock intro screen will appear.

Press the

process. The HP Image Unload software will launch on your

computer, and the images in the camera will automatically

unload to the computer. If there were any images on the

camera that had been selected in the

printing or e-mail, those actions are started after the images

have been unloaded to the computer.

The camera will return to the dock intro screen when your

images have been saved and shared. You can now take the

camera out of the dock, or leave it there to recharge the

camera batteries.

Downloaded From camera-usermanual.com

Appendix B: Camera dock

If you are using a Macintosh computer, switch the

Disk Drive

Setup

button on the dock to start the unload

in the

USB Configuration

menu.

menu for

Table of Contents