Advertisement
Explanation LED Indication
In the USB-modem there is a multi-colour-LED (light), which shows the status of the modem, using different co-
lours and flash-signalling. In this table below an explanation is given of all different situations:
LED indication:
Red
Green blinking
Green burning
Purple blinking
Purple burning
Blue burning
Light-Blue burning
Safety Warning
To the owner
• The use of electronic transmitting devices is forbidden in aircraft, at petrol stations and in hospitals.
Please observe and obey all warning signs and switch off your modem in these conditions.
• Operating USB-modem may interfere with medical devices like hearing aides and pacemakers.
• Be aware of warning signs in places such as oil refineries or chemical factories where there are explosive gases
or explosive products being processed.
• Store the USB-modem out of the reach of children. The USB-modem may cause injury if used as a toy or may
be damaged by rough play or moisture.
Using your USB-modem
• Only use original accessories supplied by the manufacturer. Using unauthorized accessories may
invalidate your warranty.
• Avoid using the USB-modem near or inside metallic structures or establishments that can emit
electromagnetic waves.
• The USB-modem is not waterproof, please keep it dry and store it in a cool place out of direct sunlight.
• Handle the USB-modem with care. Don't drop, bend, knock or treat it harshly to avoid damage to the unit.
• There are no user serviceable parts. Dismantling the unit will invalidate the warranty.
• Operating temperature range of -20°C ~60°C and humidity 5%~95% are recommended.
USB-modem working status:
Error Status, or Modem not ready yet, busy starting up
Attached to GPRS or EDGE network
Active connection via GPRS or EDGE network
Attached to UMTS or HSDPA network
Active connection via UMTS network
Active connection via HSDPA network
Micro-SD memory-card found and ready to use
Advertisement
