Page 1
When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a RIDGID product. ®...
IMPORTANT SAFETY INSTRUCTIONS n Keep cord and charger from heat to prevent damage WARNING! to housing or internal parts. READ AND UNDERSTAND ALL INSTRUCTIONS. n Do not let gasoline, oils, petroleum-based products, Failure to follow all instructions listed below, may etc., come in contact with plastic parts.
SYMBOLS Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Wet Conditions Alert Do not expose to rain or use in damp locations.
OPERATION CHARGER sHown witH 12 V LitHiUM-ion bAttERy pACk APPLICATIONS You may use this product for the following purposes: n Charging 12 V RIDGID lithium-ion batteries ® CAUTION: If at any point during the charging process none of the LEDs are lit, remove the battery pack from the charger to avoid damaging the product.
Page 5
OPERATION LED FUNCTION OF CHARGER See Figure 3. BATTERY GREEN ACTION INDICATOR PACK Power Without battery pack ON Ready to charge battery pack When battery pack reaches cooled Evaluate Hot battery pack Flashing temperature, charger begins fast charge mode When battery pack reaches warmed Evaluate Cold battery pack Flashing...
MAINTENANCE GENERAL MAINTENANCE WARNING: Avoid using solvents when cleaning plastic parts. Most When servicing use only identical RIDGID ® plastics are susceptible to damage from various types of replacement parts. Use of any other parts may commercial solvents and may be damaged by their use. Use create a hazard or cause product damage.
RIDGID, Inc. All warranty communications should be than an authorized service center for RIDGID branded hand directed to One World Technologies, Inc., attn: RIDGID Hand ® held and stationary power tools. Consumable accessories Held and Stationary Power Tool Technical Service at (toll provided with the tool such as, but not limited to, blades, free) -866-59-70.
Page 8
12 VOLT LITHIUM-ION BATTERY CHARGER 140446001 (R86049) Customer Service Information: For parts or service, contact your nearest RIDGID authorized service center. Be ® sure to provide all relevant information when you call or visit. For the location of the authorized service center nearest you, please call -866-59-70 or visit us online at www.ridgid.com.