Selecting Installation Position; Ups Setup; Tower Setup - Orion Network Pro 1000 User Manual

3.4 Selecting Installation Position

In order to minimize the possibility of damage to the UPS and extend
the life of the UPS, it is necessary to select a proper environment to install
the unit. Please follow the instructions below:
1. Keep at least 20cm(8 inches) clearance
from the rear panel of the UPS from the
wall or other obstructions.
2. Do not block air-flow to the ventilation
openings on the front and rear of the unit.
3. Please ensure the installation site
environmental conditions meet the UPS
specifications to avoid overheating and
excessive moisture and to prolong
battery life.
4. Do not place the UPS in a dusty or
corrosive environment or near any
flammable objects.
5. This UPS is not designed for outdoor
use.

3.5 UPS Setup

The UPS offers a flexible form factor
enabling integration into a wide variety of
environments.
The UPS uses a 2U rack/tower
convertible design for 1KVA to 3KVA
systems.
If you are installing the UPS in a tower,
continue to the following section, "Tower
setup" otherwise; continue to "Rack-Mount
setup".
8

3.6 Tower Setup

Stand alone unit
9