Table of Contents
Advertisement
9.0 Machine Parts List Continued
Drawing No. Item ID
51
80-0017
52
10-0823
53
10-0812
54
10-0835-B
55
10-0400-C
56
10-0868
57
10-0846
58
10-0832
59
10-0831
60
10-0818
61
10-0023
(14) 12-Gallon, 100 PSI Carpet Extractor
Item Description
Bulk Head fitting for Extractor
3/8" Barb x 3/8" Male for Extractor
100 psi Extractor Pump
Pump Bolt 100 psi Extractor
Keeper Latch for Extractor
1/4" Female QD for Extractor
1/4" MPT Hex Nipple for Extractor
S/R Strap Bolts
S/R Bracket for Extractor
S/R Top of Tank Bolt on Extractor
Shoulder and Waist Belt Washer
New Equipment Warranty
Qty.
Lifetime warranty on roto-molded body, 2-years on vacuum motors and 100 psi pump, 1-year on all
1.00
electrical parts.
2.00
1.00
Warranty Policy
4.00
All equipment is inspected and tested before shipping from the manufacturer. All parts are
1.00
1.00
warranted to be new and free from defects in workmanship and material, under normal use to the
1.00
original retail purchaser. This warranty limits manufacturer's liability for defects in workmanship
4.00
or materials for replacement of defective parts only. The manufacturer accepts no liability for
2.00
incidental or consequential damages arisen from the use of any equipment, defective or not. This
2.00
warranty is in lieu of all expressed or implied warranties and is extended only to the original retail
4.00
purchaser. Manufacturer sales and service representatives are not authorized to waive or alter the
terms of this warranty, or to increase the obligations of the manufacturer under the warranty. Parts
replaced or repaired under this warrant are warranted for the remainder of the original warranty
period.
Freight charges and travel charges to and from the service provider shall be covered for ninety (90)
days from the purchase date. After the ninety (90) day period, these freight charges shall be paid
by the equipment owner, subject to manufacturer discretion. Certain circumstances may require
additional consideration. No travel charges shall be covered after ninety (90) days.
The manufacturer covers up to one (1) year (365 days) of service labor at the manufacturer's
calculated hourly labor rate/repair time when performed by a manufacturer's authorized service
provider. Ultimately, labor reimbursement costs are at the discretion of the manufacturer. After
one (1) year, the original retail purchaser is responsible for all labor costs with no manufacturer
reimbursement.
The original purchaser must contact the manufacturer to follow correct RMA/warranty procedures.
They must have a copy of the RMA Sheet enclosed in the box with the returned item. No returns
shall be authorized unless the proper RMA procedures are followed. It is the responsibility of the
distributor to repair the customer's equipment as soon as possible. If the distributor does not have
the facilities to repair the equipment, it may be shipped or taken to an authorized service center for
repair.
The manufacturer charges a 15% restocking fee for any items that are being returned to stock. Items
must be new, unused, free of damage and are only good for up to one (1) year. After one (1) year,
the manufacturer does not accept the return of any item(s) for a reimbursed price.
Authorized warranty replacement parts need to come directly from the manufacturer. Any use of
any other parts will void warranty. Jon-Don, Inc. does not reimburse for parts used by customer that
were not supplied directly for the machine under warranty.
The customer must contact the manufacturer prior to working on or changing out of any parts, etc.
The manufacturer must issue an RMA Sheet containing approved labor time and replacement parts.
Do not send parts or equipment back to the manufacturer without an RMA Number and approval.
No labor will be paid for, nor parts cost paid for or reimbursed, that have not previously been
approved by the manufacturer. All warranty work must be approved and authorized to qualify, and
appropriate warranty procedures must be followed.
The warranty starts on the purchase date by the original purchaser from an authorized Jon-Don, Inc.
distributor, subject to proof of purchase. The Machine Registration Form must be completed online
at the time of purchase. If proof of purchase cannot be identified, the warranty start date is ninety
(90) days after the date of sale to an authorized Jon-Don, Inc. distributor.
12-Gallon, 100 PSI Carpet Extractor (3)
Advertisement
Table of Contents
