Listening To The Radio; Playing A Tape - Sony CFD-G550CP Service Manual

CFD-G550CP

Listening to the radio

1 2
Connect the supplied AC power cord (see page 23).
1
Press POWER to turn on the player.
2
Press RADIO BAND•AUTO
PRESET (BAND on the remote)
until the band you want appears in
the display.
Each time you press the button, the
indication changes as follows:
"FM" t "AM".
3
Hold down TUNE + or – until the
frequency digits begin to change in
the display.
The player automatically scans the
radio frequencies and stops when it
finds a clear station.
If you can't tune in a station, press
TUNE + or – repeatedly to change
the frequency step by step.
8

Playing a tape

3 2
1
Connect the supplied AC power cord (see page 23).
1
Press POWER to turn on the player.
2
Press xZ to open the tape
compartment and insert a recorded
tape. Close the compartment. Use
TYPE I (normal) tape only.
3
Press N*.
The player starts playing.
10
6
3
Display
Indicates an FM stereo
broadcast
With the side you want
to play facing upward
Display
Use these buttons for additional operations
Tip
To
If the FM broadcast is
adjust the volume
noisy, press MODE until
"Mono" appears in the
turn on/off the radio
display and radio will play
in monaural.
*VOL + has a tactile dot.
To improve broadcast reception
Reorient the antenna for FM. Reorient the player itself for
AM.
for FM
Use these buttons for additional operations
To
adjust the volume
stop playback
fast-forward or rewind
pause playback
eject the cassette
turn on/off the player
*VOL + and N have a tactile dot.
POWER
VOL +, –
MODE
Press
VOL +*, –
POWER
for AM
9
m, M
xZ
X
VOL +, –
POWER
Press
VOL +*, –
xZ
M or m
X
Press the button again to resume
play after pause.
xZ
POWER
11