Av Interface; Displaying The Av I/F 1 Screen - Kenwood DDX6027 Instruction Manual

Control during DVD Video or Video CD Playback

AV Interface

You can set audio and visual (AV) interface parameters.

Displaying the AV I/F 1 screen

AV I/F 1 screen
3
2
4
5
1
58
|
English
4
5
6
O f f
7
1 Returns to the Control screen of the previous
source.
2 Calls the Sound Effects Menu. (page 70)
3 Calls the Setup Menu.
4 Selects a navigation system connection. (
"RGB": Allows the Kenwood's Navigation System
to connect via its interface cable.
"AV-IN": Allows a third-party navigation system to
connect via the AV INPUT port.
"Off": Must be used if no navigation system
is connected. (The navigation display
is cancelled when the AV source is
switched.)
5 Sets a name to be displayed when you select a
system that is connected via the AV INPUT port.
( VIDEO)
• If you have set the navigation system connection to "AV IN",
the display is fixed to "NAV".
6 Sets an image display of the system that is
connected via the AV INPUT port. (
"Off": When the image source is switched, an
image entered via the AV INPUT port is
displayed.
"On": When an image signal is entered via the
AV INPUT port, this image is displayed.
7 Displays the AV I/F 2 screen.
• If
or to display it.
RGB)
Off)
is not shown, touch