Mta Led Status Indicators - Orbitel Digital Phone Getting Started Manual

MTA LED Status Indicators

Determine the status of your MTA device by noting the LED behavior.
LED
PWR
RUN
WAN
LAN
VOIP
PHONE 1/
PHONE 2
VOICE
ACTIVITY 1/
VOICE
ACTIVITY 2
If the MTA device's LED indicators signal that there is a problem, please refer to
the Troubleshooting section on page 9 in this Guide.
MTA LED STATUS INDICATORS
Light Status MTA Status
Steady The device power is on.
Off The device power is off.
Blinking slow
The device failed to download a configuration
(3 seconds on,
file or to register with the SIP server.
3 seconds off)
Blinking fast
The device is actively downloading a
(1 second on,
configuration file or a firmware update.
1 second off)
The device has been configured successfully
Steady
and is running normally.
The power is off or the device is
Off
malfunctioning.
Blinking fast Data is being transferred.
The device is connected to a broadband
Steady
network.
The device is not connected to a broadband
Off
network.
Blinking Data is being transferred.
Steady The device is connected to an external PC.
The device is not connected to an external
Off
PC.
A call is in progress (data is being
Blinking
transferred).
Steady The device is ready to make calls.
There are new VoiceMail messages, and the
Blinking
phone is not in use.
Steady The phone is in use.
There are no new VoiceMail messages, and
Off
the phone is not in use.
Blinking A call is in progress.
Off No call is in progress.
4