How To Charge; Charging Status - M3 SMART Quick Manual

DEVICE SETUP
CHARGING

How to charge

▪ Supply power directly to the PDA using 24 Pin connector.
▪ Connect the 24 Pin connector to PDA to start charging the PDA.
▪ Charging the PDA via cradle can also be possible.

Charging status

Charging status of the PDA and the spare battery is indicated by LEDs.
LED on upper right corner of the device indicates the charging status
of the battery.
LED charging indicator on the cradle indicates the charging status of
the spare battery.
Battery attached to the PDA
The battery is being
charged.
The battery is fully
charged.
07
LED color
The spare battery is
RED
being charged.
The spare battery is fully
BLUE
charged.
Spare battery