Table of Contents
Advertisement
SYSTEM BASICS
LOCATION OF CONTROLS - REMOTE CONTROLS
1
9
2
10
11
3
4
12
5
13
6
14
7
15
8
16
17
POWER SUPPLY AC OPERATION (EXTERNAL AC-DC POWER ADAPTOR)
- This set is equipped with a "DC-jack" capable of accepting AC-
adaptors with a rating of DC = 12V, 1.5A, and with a plug with the
following polarities as shown (center positive) :
- Please use only the supplied AC-adaptor to operate the unit. use of
other adaptors may damage the unit or cause it to malfunction.
- Plug the tail end of the AC-adaptor into the DC-jack (socket) on the rear of the unit.
- Insert the plug of the AC-adaptor into a wall outlet with AC-power.
- Press the "On/ standby" key to switch on the unit.
- This unit is designed to operate without ever being totally powered "off". It will either be
"on" or in "standby mode".
- In standby mode, the blue back-light of the digital display will be dimmed but the display
will show the current time (clock function).
- Anytime during standby mode, you can switch "on" the unit by pressing the "On/ standby"
key (on remote control or front panel of the main unit).
- Save energy by switching the system to "Standby" mode when not in use.
1. ON/ STANDBY KEY
2. MUTE KEY
3. ALARM KEY
4. MEM. - KEY
5. SLEEP/ SNOOZE KEY
6. PLAY/ PAUSE KEY
7. BACK/ TUNE - KEY
8. VOLUME - KEY
9. ST./ MO./ NIGHT KEY
10. CLOCK ADJ. KEY
11. MEM. + KEY
12. EQ/ DISPLAY KEY
13. FUNCTION KEY
14. STOP/ MEM. KEY
15. NEXT/ TUNE+ KEY
16. VOLUME + KEY
17. BATTERY COMPARTMENT
E-3
Advertisement
Table of Contents
