Black Level Adjustment - Sanyo PLC-XD2200 Service Manual

Multimedia projector

Hide thumbs Also See for PLC-XD2200:

Owner's manual (78 pages)

Manual (71 pages)

Easy setup (2 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

Table of Contents

Electrical Adjustments

1. Panel type check and Setting

* Before setting, you need to check which type of LCD

panel is placed on the projector according to the item

"LCD Panel/Prism Ass'y removal" in the chapter "Optical

Parts Disassembly".

1. Enter the service mode.

2. Panel Type Check

290

Select group no. "

" , item no. "

value as follows;

Data value: 0

For L-Type of LCD Panel

Data value: 20 For R-Type of LCD panel

. Panel Type Setting

290

Select group no. "

data value from 10 to 0 or 20 depending on your

LCD Panel type. When the data value reaches 0 or

20, it returns to 10 quickly. The gamma-characteris-

tics changes according to your selection.

Note:

Be careful to take this adjustment. The value of

gamma adjustment data will be reset and cannot be

restored if you change the mode of LCD panel type.

2. Fan control adjustment

1. Enter the service mode.

2. Connect a digital voltmeter to test point "

(+) and chassis ground (-). Select group no. "

item no. "

" and change data value to adjust voltage

4.5 ±0.1V

to be

. Connect a digital voltmeter to test point "