Sanyo PLC-XD2200 Service Manual page 15

Mechanical Disassembly
c optical unit, lamp A'ssy and SW902 removal
1. Remove the Lens spacer sheet-top. Remove 2 screws A(Mx8) to remove the
Optical back shield.
2. Remove  screws B(Mx7) to remove the Lamp A'ssy. Remove 4 screws
C(Tx10) to remove the Optical Unit, Remove 4 screws D(Tx8) and 2 screws
E(Tx8) to remove the Lamp holder and Ballast socket.
. Remove the lamp cover switch(SW902).
Lens spacer
sheet-top
Optical Unit
A (Mx8)X2 A
Optical back shield
C
C (Tx10)X4
C
D (Tx8)x4
C
B
B
B (Mx7)x
D
E Ballast socket
D
D
E(Tx8)x2
Lamp holder
SW902
-15-
Lamp Ass'y
Fig.3