Hitachi DH 25PA Handling Instructions Manual page 16

Center pin
–
Center pin (A)
Center pin (B)
Do not use core bits with
outer diameter of 25 mm
and 29 mm.
4. Bolt placing operation with Chemical Anchor. (Rotation + Striking)
Standard socket
(
on the market
5. Drilling holes (Rotation only) (DH25PB only)
Drill chuck (13VLA)
Chuck wrench
13 mm drill chuck ass'y (includes chuck wrench) and chuck (for drilling in steel or wood).
6. Driving Screws (rotation only) (DH25PB only)
15
Core bit (outer diameter)
(A)
(B)
with guide plate
(The guide plate is not equipped with core bits
with outer diameters of 25 mm and 29 mm.)
(SDS-plus shank)
)
12.7 mm Chemical Anchor Adapter
19 mm Chemical Anchor Adapter
DH25PB: Chuck adapter (D)
Bit No. DH25PB: Chuck adapter (D)
Bit No.
No. 2
No. 3
25 mm
29 mm
32 mm
35 mm
38 mm
45 mm
50 mm
65 mm
80 mm
90 mm
(SDS-plus shank)
(SDS-plus shank)
Screw Size Length
3 – 5 mm 25 mm
6 – 8 mm 25 mm
Core bit shank
Core bit shank (A)
Core bit shank (B)