Specifications; Standard Accessories; Optional Accessories (Sold Separately) - Hitachi DH 25PA Handling Instructions Manual

PRECAUTIONS ON USING HAMMER DRILL
1. Wear ear protections
Exposure to noise can cause hearing loss.
2. Do not touch the bit during or immediately after
operation. The bit becomes very hot during operation
and could cause serious burns.
3. Before starting to break, chip or drill into a wall, floor
or ceiling, thoroughly confirm that such items as
electric cables or conduits are not buried inside.

SPECIFICATIONS

Model
Voltage (by areas)*
Power Input
No-load speed
Full-load impact rate
concrete
Capacity steel
wood
Weight (without cord and side handle)
Function
*Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

(1) Case (Molded plastic) ............................................... 1
(2) Side handle ............................................................... 1
(3) Stopper ....................................................................... 1

OPTIONAL ACCESSORIES (sold separately)

1. Drilling anchor holes (Rotation + Striking)
Drill bit (Slender shaft)
Drill bit (Slender shaft)
Outer diameter
3.4 mm
3.5 mm
Drill bit (Taper shank) and taper shank adapter
Drill bit (Taper shank)
13
(110 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V)
Rotation + Striking
Adapter for slender shaft
(SDS-plus shank)
Drill bit (slender shaft)
Effective length
45 mm
Taper shank adapter
(SDS-plus shank)
Cotter
4. Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
5. Always hold the body handle and side handle of the
power tool firmly. Otherwise the counterforce
produced may result in inaccurate and even
dangerous operation.
6. Wear a dust mask
Do not inhale the harmful dusts generated in drilling
or chiseling operation. The dust can endanger the
health of yourself and bystanders.
DH25PA
650 W*
0 – 1100 /min.
0 – 4000 /min.
3.4 – 25 mm
–––
–––
3.4 kg
(4) Dust cup .................................................................... 1
Standard accessories are subject to change without
notice.
Overall length
90 mm
DH25PB
13 mm
32 mm
Rotation + Striking,
Rotation only