Hdmi Output - Canon EOS 5D Mark III Instruction Manual

HDMI output + LCD
This is for recording the HDMI output image to an external recording
device. [No mirroring] is set by default.
If you set [Mirroring], the movie displayed on the LCD monitor as it
is being recorded can also be displayed from the HDMI output. Note
that the video from the HDMI output will be displayed without the
shooting information or masking for indicating image area.
If [No mirroring] is set, the movie will be displayed on the LCD
monitor, but if there is HDMI output, the LCD monitor will turn off.
With this setting, the movie from the HDMI output will show the
shooting information and masking for indicating image area.
However, by pressing the <B> button, you can eliminate the
information from the output.
If the HDMI movie is output without information, the card's remaining
capacity, battery level, internal temperature increase (p.247) and other
indicators will not appear on the HDMI output screen. Be aware of this if
[No mirroring] is set. If [Mirroring] is set, you can check these
indicators on the LCD monitor.
When you are not shooting movies, the power will turn off automatically
in accordance with the auto power off time. If you are recording the HDMI
output image to an external recording device, setting [52: Auto power
off] to [Disable] (p.55) is recommended.
Audio is not output during HDMI output.
Even if [Mirroring] is set, no image will be displayed through the HDMI
output when a movie is played back or menu is displayed.
When you stop movie shooting, the HDMI output image will pause (frame
stop) while the movie is being recorded to the card. After the recording is
completed, the image will be displayed normally.
Simultaneous output from both HDMI and A/V OUT is not possible. The
movie will be output to the cable that was connected to the terminal last.
During A/V OUT output, nothing will be displayed on the LCD monitor.
The brightness of a movie shot by the camera and that of a recorded
HDMI output image on the external recording device may differ
depending on the viewing environment.
3 Menu Function Settings
245