Table of Contents
Advertisement
Highlight the box beside Automatic Time Sync and press the
On and Off.
Highlight the box beside SNTP Server and press the
highlighting them and using the Up and Down arrow buttons to increase or decrease the number
value.
Highlight the box beside Interval and press the
synchronization from 1 to 300 minutes.
The box beside System Clock displays the DVR's time setting.
The box beside Server Clock displays the time setting of the time server. Highlighting the
Update button and pressing the
NOTE: The Server Clock will display " – " when the DVR cannot load the time
information from the time server.
The box beside Next Synchronization displays the time when the next synchronization is
scheduled. If you want to synchronize the time instantly, highlight the Now... button and press
the
button.
CAUTION: When selecting Now..., any video with a later time and date will be lost if the
time and date of a time server is earlier than the last recorded image of the DVR.
NOTE: When the time difference between the DVR and the time server is more than one
minute, the DVR might not synchronize the time to prevent any unexpected loss of
recorded video data. If you want to synchronize the time manually, select Now....
Highlight the Run as Server box and press the
between On and Off. When it is On, the DVR you are setting up will run as a time server.
You can save your changes by highlighting OK and pressing the
exits the screen without saving the changes.
Highlight the box beside Date Format and press the
Highlight the format you wish to use and press the
button. Change the numbers by
button. Set the time interval for
button updates the server clock.
button. Pressing the
button. A list of date formats appears.
button. The choices are:
MM-DD-YYYY
DD-MM-YYYY
YYYY-MM-DD
MM/DD/YYYY
DD/MM/YYYY
YYYY/MM/DD
Digital Video Recorder
button. This toggles between
button toggles
button . Selecting Cancel
23
Advertisement
Table of Contents
