Table of Contents
Advertisement
Digital Video Recorder
The Quick Setup screen allows you to set up the most commonly used features of your DVR.
Use the arrow buttons to move through the options. Pressing the
button lets you make your
selections.
Highlight the box beside Quick Setup and press the
button to toggle between On and Off.
If you select Off, you will use the Normal Setup screen to change the DVR's settings.
Highlight the Record Speed box and select recording speeds from as few as one image every
10 seconds to as fast as 60 ips.
NOTE: The DVR has a maximum recording speed of 60 ips per camera, however, the
recording speed may not be achieved when averaged over all cameras.
Highlight the Record Quality box and select from Very High, High, Standard and Low.
Highlight the box beside Audio Recording and select either On or Off.
NOTE: It is the user's responsibility to determine if local laws and regulations permit
recording audio.
Highlight the box beside Sequence Dwell Time and select from 3 to 60 seconds for the camera
sequence dwell time.
Selecting System Information... enters that screen.
Selecting Storage... enters a screen where you can check the storage status.
Selecting Camera... enters a screen where you can set up camera information.
Selecting Network Setup... enters a screen where you can set up network information.
Selecting Password... enters a screen where you will be able to change passwords.
Selecting Date/Time... enters a screen where you will be able to set the DVR's time and date.
Selecting System Shutdown... shuts the DVR down. When shutting down the DVR, you
need to confirm that you want to shut down the unit, you will be asked for an administrator
password.
NOTE: The Quick Setup mode will be released automatically when the user changes the
DVR settings remotely using the RAS(Remote Administration System) program.
17
Advertisement
Table of Contents
