Switching Spectrum Analyzer Display; Presetting Disc Names - Kenwood KDC-D300 Instruction Manual

Kenwood cd player model number: kdc-d300
Table of Contents

Advertisement

Switching Spectrum Analyzer Display

You can select the display to enjoy sounds with eyes.
Operation for "N" Setting:
Each time you press the DISP button, the spectrum analyzer
display switches as following table;
Operation for "O" Setting:
1
Selecting CD play source mode.
2
Each time you press the DISP button, the spectrum analyzer
display switches as follows;
Displays 1 to 9 are automatically
shown in succession for
about five seconds each.
Display pattern 1
Display pattern 2
Display pattern 3
Display pattern 4
Display pattern 5
Display off
Display pattern 9
Display pattern 8
Display pattern 7
Display pattern 6
— 7 —

Presetting Disc Names

NOTE
Depending on the centre unit, the number of characters and/or
the number of discs that can be preset may differ, or operations
may not be possible.
Operation for "N" Setting:
This unit permits up to 12 characters to be used for disc name
presetting with as many as 40 discs.
The disc name will be displayed when the disc name has been
preset to any of the connected units.
Operation for "O" Setting:
This unit permits up to 12 characters to be used for disc name
presetting with as many as 40 discs.
The characters that can be entered are "A to Z, 0 to 9, []/+-
*=<>".
The disc name will be displayed when a CD that has been disc
name preset to this unit is played by this unit.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents