Table of Contents
Advertisement
Plus-one MD play
Even when three MDs have been set in the main unit, a further
MD can be played as the plus-one MD.
To play a plus-one MD (a fourth MD):
1
Press one of the 01 - 03 buttons for at least one second.
The MD currently set in the play position will now be stored in
the stack position.
2
Insert the MD in the MD slot.
The disc is then set in the play position. The
and the disc begins to play.
NOTE
• While the plus-one MD is being played, the buttons 01 to
03 will blink red.
• An MD cannot be inserted when the operation indicator is
red. Wait until it goes green, and then insert the MD.
• When a plus-one MD has been set in the main unit, the disc
cannot be changed or the disc scan switched ON/OFF from
the centre unit, nor can random magazine playback be
switched ON/OFF from the centre unit.
• While the plus-one MD is playing, the disc repeat function
will operate, but it cannot be cancelled from the centre unit.
To remove the plus-one MD:
Press one of the 01 - 03 buttons.
NOTE
While the plus-one MD is being ejected, the buttons 01 to 03
will blink green.
Switching Spectrum Analyzer Display
You can select the display to enjoy sounds with eyes.
Operation for "N" Setting:
Each time you press the DISP button, the spectrum analyzer
display switches as follows;
Operation for "O" Setting:
1
Selecting MD play source mode.
2
Each time you press the DISP button, the spectrum analyzer
indicator blinks
display switches as follows;
1 "SCAN MODE ON":Displays 2 to 0 areautomatically
shown in succession for about five seconds each.
2 "PEAK HOLD"
3 "LASER"
4 "H-SCOPE"
5 "FIREWORKS"
6 "SQUASH"
7 "V-SCOPE"
8 "BLIZZERD"
9 "KISS"
0 "SIDE WAVE"
! "SPEANA OFF":Spectrum analyer off.
NOTE
• The spectrum analyser name is not shown while the disc title
or track title is being displayed.
• During operation 1, the DEMO indicator will light.
— 7 —
Advertisement
Table of Contents
